A linear lighting system that lets you cut the profile, cover, and LED strip together — at any point along the run — so the luminaire length is dictated by the space, not by the nearest factory cut mark.
Specifying linear lighting usually means a trade-off. Either the run length is dictated by where the LED strip happens to have a cut point, or someone on site is soldering connections to make the numbers work — adding labour, time, and a point of failure to a detail that’s supposed to look effortless.
The Cut & Connect Linear Aluminium Profile removes that trade-off. It’s a linear lighting system designed to let you create custom luminaires quickly, without soldering or specialised labour — so the lighting plan can follow the architecture, instead of the other way around.
Cut Anywhere. Not Just at the Marked Points.
The defining feature of this system is in its name. Cut & Connect lets you cut the profile, the cover, and the LED strip simultaneously, at any point along the length — without hunting for a specific cutting mark on the strip itself.
For a designer, this matters most when a luminaire’s required length doesn’t land neatly on a multiple of the strip’s standard cutting interval. Instead of rounding up, rounding down, or redesigning the detail around the strip’s limitations, the profile is simply cut to the exact length the space calls for.
Cut Point
Anywhere
No need to align the cut to a fixed marking on the LED strip.
End Result
No Shadows
Uniform light from end to end, even at odd or custom lengths.
COB Technology: Continuous Light, Even in Shallow Profiles
The LED strip used in this system is built on COB (Chip-on-Board) technology, which produces a continuous line of light rather than a string of individually visible points. The result is a genuine dot-free effect — light reads as one smooth line, not as a series of LEDs behind a diffuser.
This holds true even in shallow profile depths, which is typically where dotting and hot spots are hardest to avoid. For coved ceilings, shelf-edge lighting, or any detail where the profile sits close to the eye, this is the difference between a lit line and a lit-up row of dots.
No Soldering. No Tools. No Specialised Labour.
The second half of the system’s name addresses installation. An endcap with an integrated connector cable connects the finished luminaire to its power supply with a simple click — a manual connection that needs no soldering iron, no tools, and no electrician trained specifically in luminaire assembly.
1. Cut to length
Profile, cover, and LED strip are cut together at the exact point the run requires.
2. Fit the endcap
The endcap with the connector cable fits onto the cut profile end.
3. Click to connect
The connector clicks into the power supply — connection complete, no soldering involved.
Mount and conceal
The slim aluminium profile sits flush into cabinetry, joinery, or coves for a concealed finish.
In practice, this means installation isn’t gated by the availability of a specialist. Site teams can make the connection themselves, which shortens the path from spec to finished install and reduces the labour line on the project.
“Minimal design. Maximum light.”
The product’s own positioning — and a fair summary of what the detail looks like once it’s installed.
Performance That Holds Up to Spec
Cut-and-click installation only matters if the light quality justifies the detail. On that front, the profile is built to sit comfortably in spaces where light quality is non-negotiable — retail display, residential joinery, hospitality millwork.
| Attribute | Detail |
|---|---|
| Light output | Up to 1000 lumens per metre |
| Colour rendering | High CRI, 90+ |
| LED technology | COB (Chip-on-Board) — continuous, dot-free linear light |
| Cutting | Cut & Connect — profile, cover, and strip cut together at any point |
| Installation | Solder-free; endcap with connector cable, click-fit to power supply |
| Mounting | Slim aluminium profile, suited to concealed/recessed mounting |
Colour Temperature Options
Available across three colour temperatures, so the same system can be specified consistently across different zones of a project.
Where It Fits in a Project
Joinery and cabinetry
shelf edges, wardrobe interiors, and kitchen cabinetry, where the profile needs to disappear into the detail.
Coved and recessed ceiling details
where custom run lengths are common, and installation timelines are tight.
Retail and hospitality fit-outs
where custom run lengths are
Common and installation timelines are tight
Multi-zone residential projects
Enjoy hassle-free shopping with our delivery and assembly services. Let our team handle the heavy lifting and installation so that you can relax.
The Specification Takeaway
For designers and architects, the value of the Cut & Connect Linear Aluminium Profile isn’t any single feature — it’s that the cutting, the light quality, and the installation method are all solved at the same time, by the same detail. A run length doesn’t need to be rounded to fit a strip’s cut points. A dot-free line doesn’t require a deeper profile. And a clean install doesn’t require a specialist soldering on-site.
That combination is what makes it possible to spec linear lighting around the actual geometry of a space, rather than around the limitations of the lighting product itself.
Specify Cut & Connect on Your Next Project
Get technical drawings, samples, or talk through a project-specific application.
